|


ProSet Systems Inc.
1355 Capital Circle
Lawrenceville, GA, 30043
Tel: 800-262-5355
Fax: 770-339-1784

|

|
|
The ProSet Trap Guard®
Drain System
Trap Guard® solves the problem of infrequently used drains by eliminating
the need for a trap primer while preventing the emission of sewer
gases and the backup of raw sewage into living or work areas. It is
much less expensive, much more effective and much simpler to
maintain than a trap primer.
You
can think of it as a “waterless trap primer” - providing the
ultimate flexibility in placing drains. Additional advantages are
provided at the bottom of this page.
View
Trap Guard® Video

How
Trap Guard® Works
The Trap Guard® sets watertight inside the
drain and stays open when water is flowing but closes when the water
stops. When the Trap Guard® is closed, it successfully resists any
emission of sewer gas, even if that gas is under significant
pressure. It uses a flexible tube made of a space age, Elastomeric
TM
material that is treated to roll up when water is not passing
through but is flexible enough to open and permit water flow, from
an intermittent drip to fire-hose type flows.
See Drawings
and Installation Options
The
diagrams below show the Trap Guard® open (on the left) and closed (on
the right).
|
Trap Guard® Open |
Trap Guard® Closed |
 |
 |
|
The
Trap Guard® Advantage in Cost
 | Initial cost
plus installation is much less expensive than alternative
solutions |
The Trap Guard®
Advantage in
Performance
 | There is no
restriction on water flow
(up to 33 gpm: similar to the flow from a fire hose) |
 | It eliminates sewer
gas emission and backup of raw sewage into living or working areas |
 | Trap Guard’s
space-age, Elastomeric™ material has been proven in plumbing
industry uses for forty years and has been used in non-plumbing
critical applications for almost fifty years of continuous use
without degradation. |
 | Maintenance-free
except for occasional flushing |
 | Successfully tested
with common cleaning solutions and other chemicals |
 | Functions despite
lodging of common debris (mop strings, food residue, etc.) |
 | Resistant to lime
scale and microbiological growth |
The Trap Guard®
Advantage in
Inspection
 | Only requires a
simple inspection, with all parts accessible after completion,
simply by viewing with a flashlight.. |
|
The
Trap Guard® Advantage in
Design and Installation
 | It eliminates the
headaches of specifying and installing trap primers |
 | Eliminates the
requirement to consider or specify a trap primer – with its
associated costs |
 | No tapping
required in the drain to attach a waterline |
 | No small
diameter, hard-to-support piping required under floor or behind
wall |
 | No damaged pipe
to worry about during pouring of concrete floor |
 | No costly 3-stage
installation process |
The Trap Guard®
Advantage in
Application
 | Trap Guard® drains can be used for wood floors, condensate drains, water
heater drains, executive showers, outdoor drains, residential
bathrooms, under kitchen sinks, apartment and condo bathrooms
(providing tenant separation for water as well as fire) and other
applications |
 | Trap Guard® can be
used for retrofitting, with its variety of designs ensuring
compatibility with all other drain types |
|

Copyright © 2003
by [ProSet Systems Inc]. All rights reserved. |
|
|